American Standard Williamsburg 2806E Series 설치 지침

{카테고리_이름} American Standard Williamsburg 2806E Series에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Williamsburg 2806E Series 4 페이지. American standard williamsburg elite 6' whirlpool installation instructions

페이지 인쇄

WILLIAMSBURG

ELITE™ 6'

HIGH GLOSS ACRYLIC

SHOWN LESS ALL FITTINGS

279mm

(11)

ON/OFF

SWITCH

457mm

229 x 330mm

(18)

(9 X 13)

FLOOR

CUTOUT

914mm

(36)

INTEGRAL

FITTING DECK

140mm

(5-1/2)

C/L OF

DRAIN

OVERFLOW

108mm

C/L OF

OVERFLOW

(4-1/4)

51mm

(2)

INTEGRAL

FEET

SUPPORT

ROUGH

FLOOR

1-1/2 N.P.T.M. THREADS

1-1/2 O.D.TAILPIECE

GENERAL SPECIFICATIONS FOR 2806E WHIRLPOOL

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

WHIRLPOOL MIN. OPERATING VOL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

PUMP

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor

immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before

enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect

the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,

motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and

enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead

(required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

752872-100 REV. C

2806E SERIES

WHIRLPOOL

INSTALLATION INSTRUCTIONS

1829mm

(72)

OUTLINE OF

PROVIDE ACCESS

CUTOUT

TO PUMP FOR SERVICE

ON ALL INSTALLATIONS

LEVELING STRINGER

(NOT FOR SUPPORT)

546mm

(21-1/2)

495mm

(19-1/2)

108mm

51mm

(4-1/4)

(2)

72 x 36 x 21-1/2 In. (1829 x 914 x 546mm)

135 Lbs. (61 Kg.)

744 Lbs. (338 Kg.)

73 Gal. (276 L)

44 Gal. (167 L)

45 x 24 In. (1143 x 610mm)

60 x 30 In. (1524 x 762 mm)

14-1/2 In. (368mm)

41 Lbs./Sq.Ft. (198 Kgs./Sq.m)

25.6

49.4

2.1 HP, 14.4 AMPS ,120V.

THANK YOU...

for selecting an American Standard bath. Your new

bath is shipped to you after careful inspection. The

whirlpool version is completely assembled with pump,

PUMP

motor, and system piping. All you need to finish the

installation are your selected fittings and electrical

connections for a whirlpool.

To insure maximum performance and pleasure from

this product, please follow the instructions and

cautions.

List of Optional Components (not included):

• Flex-Jet Pulse Jet Kit*

• Flex-Jet Soft Jet Kit*

• E-Z-Install Heater*

List of Required Components (not included):

IN-LINE HEATER

• Drain*

REMOVABLE

BLANK

* see your Home Depot Retailer

List of Required Tools and Supplies:

Tools

• Level

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Screw Driver

• Standard

Woodworking Tools

• Personal Safety

Equipment

• Caulking Gun

• Bath Filler*

Supplies

• Nails

• Putty

• Caulking (waterproof)

• 1 x 3 or 2 x 2

• Drop Cloth

• 20 amp GFI

• Cement, Plaster,

All product names listed herein are trademarks

of American Standard Inc. unless otherwise noted.

Stringers

Outlet

Grout