EKHO RX3000 사용 설명서 - 페이지 4
{카테고리_이름} EKHO RX3000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EKHO RX3000 6 페이지.
페이지 인쇄
Features
EKHO Professional stereo audio amplifier featuring high output power and excellent value for money.
The RX range of amplifiers are ideal for the starting DJ, smaller fixed installations in pubs, clubs
canteens etc. or as a complement in larger disco installations.
Outstanding sound quality
Stereo and bridge mode
Inputs via RCA & 6.3mm jack
Rear Panel Features
1. 6.3mm Jack inputs.
Two 6.3mm jack female input connector for
connecting a signal source (mixer etc.).
2. RCA inputs.
Two RCA input connector for connecting a
signal source (mixer etc.).
3. Mode Switch.
The amplifier can use 2 different modes:
stereo & bridge.
Choose one of these functions:
Stereo mode: Standard left/right stereo
mode.
Bridge mode: This mode combines both
amps on one channel which results in
double power on this channel. Connects
the signal to the left input channel and the
output level can now be adjusted with the
left volume control.
4. Ground Lift Switch.
Allows circuit and chassis grounds to be
separated in case of problems with earth
Speaker NL4, 6.3mm Jack & binding post
outputs
loops (hum)..
5. 6.3mm Jack Outputs.
Maximum load in stereo mode 4 Ohm per
channel.
6. Speaker Outputs NL4.
Maximum load in stereo mode 4 Ohm per
channel.
Pin +1 & +2 = + output, Pin -1 & -2 = -
output
7. Binding Post Output Jacks.
Maximum load in stereo mode 4 Ohm per
channel. Maximum load in bridge mode 8
Ohm.
8. Mains Power Connector
9. Fuse
This main fuse secures the amplifier and
wires against defects. Replace this only
with a fuse of same type and value.
4 - 6