Canon i-SENSYS MF217w 시작하기 - 페이지 9

{카테고리_이름} Canon i-SENSYS MF217w에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon i-SENSYS MF217w 32 페이지.

페이지 인쇄

Specifying the Initial Settings

Follow the instructions on the screen, set the language and

time. For details on navigating the menu and how to input the

numbers, see "Navigating the Menu and Text Input Method"

(

P.8).

Language

Chinese (Simplified)

Chinese (Traditional)

English

1/2

French

Japanese

Choosing the Method to Connect the

Machine to the Computer

●

Connecting via a Wired LAN

(MF229dw/MF226dn/MF217w Only)

You can connect the machine to the computer through a

wired router. Use the LAN cables to connect the machine to

the wired router (access point).

Make sure that there is an available port in the router to connect

the machine and the computer.

Have a LAN Cable of Category 5 twisted-pair cable or higher ready.

●

Connecting via a USB cable

You can connect the machine to the computer using a USB

cable.

Make sure that the USB cable you use has the following

mark.

●

Connecting via a Wireless LAN

(MF229dw/MF217w Only)

You can connect the machine to the computer through a

wireless router*. Since it is connected to wireless, no LAN

cables are needed.

* A wireless router (access point), which supports IEEE802.11b/g/n,

is required.

Downloaded from ManualsPrinter.com Manuals

Current Time Set.

08/08 2014 10:00 AM

(0:00-12:59)

Apply

Check if your router has a button

Select from the following two methods depending on the

router (access point) that you are using.

●

There is a button.

You can easily setup if your router (access point)

has a button, and if the mark is on the router.

●

There is no button.

If there is no button on your router (access point), you

may manually select SSID and complete the settings.

Choosing the Method to Connect:

Via Wireless LAN or Other Method

(MF229dw/MF226dn/MF217w Only)

●

MF229dw/MF217w

Do you want to use the

wireless LAN to connect

to the network?

The settings can be

configured later.

Yes

There is a button.

Start from step 4 of "Push Button Mode" (P.11).

Yes

There is no button.

Start from step 4 of "Setting the Access Point

Manually" (P.11).

Connect to the computer via a wired LAN

Proceed to "Connecting via a Wired LAN

(MF229dw/MF226dn/MF217w Only)" (P.10).

Connect to the computer via a USB cable

Proceed to "Connecting via a USB Cable" (P.10).

Connect to the computer via a wireless LAN later

Proceed to "Connecting via a Wireless LAN

(MF229dw/MF217w Only)" (P.10).

●

MF226dn

Connect to the computer via a wired

Current Time Set.

LAN

Must rechg. battery

for 24 hours to save

time settings. After

1/3

turning main power

Connect to the computer via a USB

cable

Current Time Set.

Must rechg. battery

for 24 hours to save

time settings. After

turning main power

Proceed to "Connecting via a Wired

LAN

(MF229dw/MF226dn/MF217w Only)"

(P.10).

Proceed to "Connecting via a USB

Cable" (P.10).

1/3