DAB ACTIVE EI 30/30 설치 및 유지보수 지침 - 페이지 5
{카테고리_이름} DAB ACTIVE EI 30/30에 대한 설치 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DAB ACTIVE EI 30/30 20 페이지.
페이지 인쇄
1. General
2. Pumped fluids
3. Technical data
3.1 Electrical data
3.2 Operating conditions
Fig. 14 Changing the electronic card
Fig. 15 Active System kit assembly
Fig. 16 Electronic card connections
Fig. 17 Load loss diagram
Read this documentation
Carefully before
Installation.
Installation, electrical connection and commissioning
must be carried out by skilled personnel in
compliance with the general and local safety
regulations in force in the country of installation of
the product. Failure to comply with these instructions
not only causes risk to personal safety and damage
to the equipment, but invalidates every right to
assistance under guarantee.
ENGLISH
Page
1. GENERAL
19
ACTIVE is a compact pressure boosting system
19
composed of a pump, a motor and a built-in control
19
unit, which can also be installed outside.
The pump, with the Active system, starts automatically
19
when there is water consumption and stops when the
19
request for water ends.
19
The system is equipped with:
20
− an easy-to-use control panel,
20
− a built-in tank with diaphragm which reduces the
20
number of starts and stops in the event of leaks
21
from the pipe,
21
− protection against dry running .
22
22
1.1 Applications
22
Active is used particularly for increasing pressure in
23
storage tanks and for supplying water from wells:
− in houses,
23
− in holiday homes,
24
− in farms,
− in greenhouses and gardens .
24
24
The pump can be used for pumping rainwater and
24
drinking water.
25
2. PUMPED FLUIDS
26
The machine has been designed and built for pumping
water, free from explosive substances and solid
26
particles or fibres, with a density of 1000 kg/m³ and a
kinematic viscosity of 1 mm²/s, and chemically non-
26
aggressive liquids.
27
109
110
3. TECHNICAL DATA
111
3.1 Electrical data
- Supply voltage:
- Max. current:
- Degree of protection:
- Insulation class:
- Power cable:
3.2 Operating conditions
- Range of operation:
- Head up - Hmax (m):
- Liquid temperature:
- Environment temperature:
-
Storage temperature:
- Maximum working pressure:
- Relative humidity in air:
- Starting pressure:
- Connections:
- Noise level:
19
1x220-240V
6.5 A
IP 55 Active System
IP 44 Motor
F
1.5 mt H05 RN-F
with/without plug
0.3 ÷ 8.4 m³/h
page 112
0 ÷ 35°C domestic use
(EN 60335-2-41)
0 ÷ 40°C
-10 ÷ 40°C
8 bar (800 Kpa)
Max. 95%
1.5 ÷ 2.5 bar (settable)
1" GAS / NPT
Directive EC 89/392/EEC
50-60Hz
-10+6%