Ekinex EK-BW1-TP 빠른 시작 매뉴얼

{카테고리_이름} Ekinex EK-BW1-TP에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ekinex EK-BW1-TP 4 페이지. Knx voice control interface

페이지 인쇄

KNX voice control interface

Code: EK-BW1-TP

Device with interface function between a KNX network

(TP, twisted pair) and home speakers equipped with Ama-

zon Alexa or Google Assistant. The interface, connected

to ekinex cloud services, is suitable for the control by voi-

ce commands of light, climate and motorization of a mo-

dern KNX standard building.

Description

The product is designed for installation on DIN profile rail

and occupies 2 modules. The 12-24 Vdc power supply is

external (power supply not included in the supply). The

product with hardware based on embedded operating sy-

stem, has a KNX TP node (twisted pair) and can therefore

be connected directly to the bus network of KNX devices.

The external connectivity is realized through the Ethernet

port that connects the device directly to the home router.

The integrated web server provides access to the configu-

ration environment and provides the following functions:

• Interface network settings

• Registration and subscription to ekinex cloud services

• Automatic import of the ETS project and merging with

previous imports

• Configuration of voice control accessories (max 150

accessories): lighting (on/off, dimmed and RGB), mo-

torizations (open/close stop and position) and climate

• Configuration of action sequences on the KNX bus,

which can be called up as scenarios by voice assistants

• Configuration of the IFTTT (If This Than That) cloud

platform for the creation of association rules between

events on the KNX bus and compatible services (e.g.

sending e-mail)

On the Amazon Alexa and Google Assistant apps, the

Ekinex skill and action are available respectively for the

complete configuration of the service.

Main features

• 12-24 Vdc power supply (absorption 240 mA at 12 Vdc)

by means of a special plug-in terminal supplied. Power

supply not included

• KNX TP bus (twisted pair) via red-black terminal pro-

vided

• 1 Ethernet port via cat. 5 or higher cable and standard

RJ45 connector

Technical Sheet: STEKBW1TP_EN

• 2 frontal LEDs: POWER LED for signalling the presen-

ce of power supply; SERVICE LED for signalling parti-

cular operations in progress.

• 1 RESET button housed under the front cover on the

back of the vertical card

• 1 RS485 port: not used

• 1 USB 2.0 port: not used

Other features:

• Plastic housing

• Design for mounting on 35 mm profile rail (according

to EN 60715)

• Degree of protection IP20 with product installed (accor-

ding to EN 60529)

• Insulation class II (according to EN 60335-1)

• Climatic classification 3K5 (indoor, dry) and mechanical

3M2 (according to EN50491-2)

• Device weight: 120 g

• 2 UM modular device (1 UM = 18 mm)

• Dimensions 36 x 90.5 x 62 mm (W x H x D)

Environmental conditions:

• Operating temperature: 0°C ... + 40°C

• Storage temperature: - 10 ... + 70°C

• Transport temperature: - 10 ... + 70°C

• Relative humidity: 95% not-condensing

Operating, signaling and connection elements

The voice control interface is equipped with status LEDs,

a RESET button located under the front panel of the devi-

ce, terminals for power supply connection, KNX bus line

and Ethernet network.

1. LED POWER

2. LED SERVICE

3. RESET push-button

4. Clamp for power-supply 12-24 Vdc

5. Clamp for KNX bus

6. RJ45 Ethernet plug

Signaling elements

• POWER LED: indicates the presence of 12-24 Vdc po-

wer supply at terminals

• SERVICE LED: Normally off, steady mode or flashing

during IP address recovery sequences or factory re-

configurations

Control elements

• RESET button: must be pressed to activate IP address

reset sequences or factory settings.

EK-BW1-TP

Voice control