American Standard Colony PRO Series 설치 지침 - 페이지 2
{카테고리_이름} American Standard Colony PRO Series에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Colony PRO Series 4 페이지. Single control centerset lavatory faucet
American Standard Colony PRO Series에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (20 페이지)
페이지 인쇄
2
STANDARD WALL INSTALLATION
• Figure 1. Remove plaster guard from valve. Push CAP (1)
over VALVE CARTRIDGE (2) until seated against stop.
• Figure 2. Push ESCUTCHEON (3) onto CAP (1) and attach
to valve body with LONG SCREWS (4).
THIN WALL INSTALLATION
• Figure 1a. Push CAP (1) over VALVE CARTRIDGE (2) until
seated against stop.
• Figure 2a. Push ESCUTCHEON (3) onto CAP (1) and attach
to valve body with LONG SCREWS (4).
PLASTER
GUARD
Figure 1.
Figure 1a.
3
INSTALL TUB SPOUT, SHOWER HEAD,
SHOWER ARM WITH FLANGE
Protect finish on SHOWER HEAD
CAUTION
and TUB SPOUT when installing.
• Remove pipe cap and plug from shower and tub rough piping.
• Slip TUB SPOUT (1) onto tub nipple and tighten with 2.5 mm Hex Wrench.
CAUTION: Protect finish on TUB SPOUT when installing.
• Install SHOWER ESCUTCHEON (2) onto SHOWER ARM (3). Apply sealant
or Teflon tape to threads on both ends of SHOWER ARM (3) and thread
longer leg of SHOWER ARM (3) into shower elbow.
• Thread SHOWER HEAD (4) onto SHOWER ARM (3).
CAUTION: Protect finish on SHOWER HEAD and ARM when installing.
• Slip ADAPTER (5) onto CARTRIDGE (6) and thread SCREW (7) on.
4
HANDLE INSTALLATION
• Install HANDLE (1) by pushing it onto CARTRIDGE STEM (2)
and tightening SET SCREW (3) from below with 2.5 mm
Hex Wrench supplied.
1
2
2
1
4
- 2 -
1
Figure 2.
1
Figure 2a.
ELBOW
TUB FILLER
NIPPLE
1 -
1 / 2
" R
E F
3
4
3
4
2
SHR.
PIPE
3
PLUG
6
5
7
.
1
2.5 MM HEX
WRENCH
2
1
3
2.5 MM HEX
WRENCH
M965931 Rev. 1.0 (12/18)
4