American Standard Paradigm Selectronic 7025.3 Series 설치 지침 매뉴얼 - 페이지 4
{카테고리_이름} American Standard Paradigm Selectronic 7025.3 Series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Paradigm Selectronic 7025.3 Series 9 페이지. Integrated faucet with optional above-deck mixing & smartherm
페이지 인쇄
ELECTRICAL INSTALLATION
Product
PWRX Power Kit
(PK00.WRK)
Plug-In AC Power Kit (PK00.PAC)
Hard-Wired AC Power Kit (PK00.HAC)
Multi-AC Power Kit (PK00.MAC)
Important: All faucets with the standard CR-P2 battery
come preaseambled from the factory. No further action
necessary.
PWRX 10 YEAR BATTERY
A
SYSTEM; Fig. 1
PWRK
VERSION;
™
1. Connect PWRX BATTERY PACK (1) to SENSOR
CABLE (2).
2. Secure the connections by installing into CONNECTOR
LOCKING DEVICE (3) as shown. Rotate the END CAPS
(4) to secure the connection within the CONNECTOR
LOCKING DEVICE (3).
3. Determine the mounting location of the PWRX BATTERY
PACK (1) by marking center lines as shown.
4. Place the BRACKET (5) on the horizontal center line
and mark the location of the mounting holes to be drilled.
5. Using 1/4" diameter drill bit, drill two mounting holes
aproximately 1" deep.
6. Install the two ANCHORS (6) provided into the mounting
holes.
7. Place the BRACKET (5) over the ANCHORS (6)
and secure with the SCREWS (7) provided.
Do not overtighten.
8. Insert PWRX BATTERY PACK (1) into BRACKET (5).
Fig. 1
Page
4
5
5
5
BRACKET INSTALLATION
VERTICAL
C/L
4
2
1
1
HORIZONTAL
C/L
4
3
4
3
6
5
7
M965985 (11/18)