Ekit JT Hotspot 고객 알아보기 - 페이지 6
{카테고리_이름} Ekit JT Hotspot에 대한 고객 알아보기을 온라인으로 검색하거나 PDF를 다운로드하세요. Ekit JT Hotspot 10 페이지.
페이지 인쇄Connecting via USB cable
1.
Connect your JT Hotspot to a device using a compatible
USB cable.
2.
Turn on your JT Hotspot by pressing the power button for
around five seconds. It'll take a few moments to start up, then the
Wi-Fi LED will glow blue and the network LED will glow green.
3.
Your device should recognise and automatically install the new
hardware. If it doesn't, in Windows, run the installation from
My Computer > ZTEMODEM (other operating systems may vary).
4.
Wait a few moments until you're connected.
10
Viewing and changing your
JT Hotspot settings
To view or change your JT Hotspot's settings, access the configuration
page by entering http://192.168.0.1 or
http://m.home in your web browser. The default password is admin.
Automatic or manual connection
Once you've connected your device to the JT Hotspot (see above) you
can access the internet in either Automatic or Manual mode.
Mode
How to get online
Automatic
Your device will connect to the internet
automatically. This is the default setting
Manual
To manually connect and disconnect, log in
at the JT Hotspot configuration page
(see above) and select Settings > 3G Settings
> Network Select > WAN Connection Mode >
Manual, and then click Connect or Disconnect
11