American Standard Studio S T105900 설치 지침 - 페이지 3

{카테고리_이름} American Standard Studio S T105900에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. American Standard Studio S T105900 4 페이지. Deck mount bath filler

HANDSHOWER INSTALLATION

• Drop SPRAY ESCUTCHEON (1) through the fourth hole of the tub ledge (12" max from

SPOUT center) with SPRAY ESCUTCHEON (1) directed towards tub center. Be sure

RUBBER RING (2) is properly seated in ESCUTCHEON (1). Install RUBBER WASHER

(3) and LOCKNUT (4) from underside of ledge.

• Secure SPRAY ESCUTCHEON (1) by tightening LOCKNUT (4).

• Add SEAL WASHER (5) and connect HOSE (10) to outlet nipple at the bottom

of TEE (7). Tighten firmly.

• Slip SHOWER HOSE (8) with COUPLING NUT through SPRAY HOLDER (6)

and ESCUTCHEON (1). (Note: SPRAY HOLDER (6) must be separate from

ESCUTCHEON (1) to get HOSE (8) through ESCUTCHEON (1).) Install SEAL (9)

and CHECK VALVE (12) before connecting both HOSES (8) and (10).

INSTALL second SEAL (9) and connect HAND SHOWER (11) to SPRAY HOSE (8).

When not in use, HANDSHOWER should be

NOTE

seated in the HOLDER.

CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH

WITH A COARSE SURFACE.

- 3 -

LOCKNUT

M965957 (7/18)