DONG SUNG SENSORS DC Series 매뉴얼 - 페이지 8

{카테고리_이름} DONG SUNG SENSORS DC Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DONG SUNG SENSORS DC Series 14 페이지. Level switch

5. Installation

Before installation,

1. Please check product's specification for use within high temp/pressure tank.

2. The DC series is a Reed S/W type and is vulnerable to impact .

Thus, please careful when carrying and installing them .

3. Default setting of DLC, DLCA-H, DLCA-HL controller is in supply mode

4. Sensor may not works with sticky liquid or liquid includes floating matters.

5. Please do not use oil with PVC float.

6. Use PTFE models for liquids such as highly corrosive chemicals .

7. Check the specific gravity of measure object.

8. To use in high viscous liquids, please contact us.

During installation,

1. Check the sensor's flange specification if it matches with tank's.

2. Put sensing unit into the tank attach with a bolt and nut (see the pics below).

3. Connect wire between your control unit and terminal block(sensor)

- Refer to "Wire connection" part of this manual.

4. Use flange-datachable product for low ceiling.

5. For outdoor use, must use head-protect cover.

6. Must keep the stopper's position.