EKKO EB12E Series 사용자 설명서 - 페이지 12

{카테고리_이름} EKKO EB12E Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EKKO EB12E Series 18 페이지. Full electric straddle stacker
EKKO EB12E Series에 대해서도 마찬가지입니다: 매뉴얼 (17 페이지), 매뉴얼 (18 페이지)

EKKO EB12E Series 사용자 설명서
- 11 -
Fig 8: The direction of the operation
5.6. Steering
To move around by the handle for vehicle.
5.7. Brake
Load braking performance depends on the road conditions and vehicle.
Brake function can be activated by the following ways through the accelerator button (12)
moved back to '0' position or the release of this button, the regenerative braking is activated.
Vehicle brake to stop.
Through the accelerator button (12) driving direction move directly to the opposite direction
from a vehicle with regenerative braking, until it began running in the opposite direction.
If the handle is moved upwards or downwards to the braking zone ('B'), vehicle braking. If
the release lever, is automatically moved to the handle braking area ('B'). The vehicle starts
until the parking brake.
Belly switch (14) can prevent the operator by extrusion. If you press this switch, the vehicle
began to slow and / or the beginning of a period of reverse driving distance ('Bw."), then stop.
If the handle on the operating area and the vehicle is not running, please consider this switch
can also operate on the vehicle.
5.8. Fault
If there is any fault or not operating the vehicle, please stop using the vehicle and press the
emergency stop switch (2).
The vehicle park in a safe area, will be the key switch (16) counter clockwise rotation, and
then pull out the key.
Immediately inform the manager and / or contact your customer service personnel. If
necessary, use a professional lifting equipment will be vehicles from the area of operations.
5.9 In case of emergency
- 11 -
- 11 -