EKKO EB12EA Series 매뉴얼 - 페이지 9
{카테고리_이름} EKKO EB12EA Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EKKO EB12EA Series 17 페이지. Full electric straddle stacker
Transport:
A. In the process of transportation vehicles must be firmly fixed on truck.
B. Reduce the fork to the lowest position. Use straps through or on the outriggers/leg
4. Daily inspection
This chapter describes the daily inspection of the equipment and recommended examination before
operation.
Daily inspection can prevent faults for failure. The following points should be checked before
operating the vehicle.
Check whether there are scratches, deformation or cracks in any welds and structure.
Check the cylinder leaks of hydraulic fluids.
Check the condition of the vehicle longitudinal driving.
Check the chain and the roller for damages or corrosion.
Check the wheels for smooth travel.
Press the emergency stop button to check the emergency braking function.
Brake function check handle lever switch.
Press the button to check for lifting and lowering function.
Check whether there is damage and protective guard is installed correctly.
Check the horns.
All bolts and nuts are tightened.
Check the key switch function.
Check the lifting limit switch.
Visually check whether there is any damage in wiring or hoses.
Check the charge of the equipment
5. Operating Instructions
The operation of this stacker, please follow the warning and safety instructions (see chapter 2).
Make sure there are no goods or other equipment interfering in your visibility!
Insert the key, turn clockwise to turn on.
Make sure the Red Emergency Button is switched on and pulled upwards.
Ready to operate.
- 9 -
- 9 -