Air Creation GTE Trek 503 지침 및 유지보수 매뉴얼 - 페이지 14
{카테고리_이름} Air Creation GTE Trek 503에 대한 지침 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Creation GTE Trek 503 18 페이지. Trikes
페이지 인쇄After any heavy landing :
Check the front fork, remove and inspect the fork pivot and wheel axis.
•
Check the seat frame and lower beam for distortion. Check seat seams.
•
Check the upper beam and the front strut, the swivel joint (movement, cracks), the engine
•
support and the engine mounting rubber mounts.
Check the rear wheel assembly, loosening of assembly devices and shock absorber pressure.
•
The structure of the wing must be completely inspected in our premises or by an approved
•
technical establishment after any heavy landing or even for slight damages.
WARNING :
Changing all NYLSTOP nuts after loosening is mandatory. Always secure such nuts using
particular LOCTITE glue.
Tél. : 33 (0) 4 75 93 66 66 - Fax : 33 (0) 4 75 35 04 03 - Internet : www.aircreation.fr – [email protected]
GDMANTREK503582-1G
AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France
Version 0010
PAGE : 14