Dongcheng DSM05-230 사용 설명서 - 페이지 3
{카테고리_이름} Dongcheng DSM05-230에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dongcheng DSM05-230 9 페이지.
페이지 인쇄
application. The correct power tool will do the job better and safer at the rate
for which it was designed.
18. Do not use tool if switch does not turn it on or off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
19. Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
20. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool's operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
Service
24. Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
VOLTAGE WARNING:
Before connecting the machine to a power source (receptacle, outlet, etc.), be
sure the voltage supplied is the same as that specified on the nameplate of the
machine. A power source with voltage greater than that specified for the machine
can result in SERIOUS INJURY to the user, as well as damage to the machine. If
in doubt, DO NOT PLUG IN THE MACHINE. Using a power source with voltage
less than nameplate rating is harmful to the motor.
-3-
SPECIFICATIONS
Model
Rated Power Input
Rated Speed
Wheel Size
Type of Wheel
Net Weight
※Due to the continuing program of research and development, the specifications
herein are subject to change without prior notice.
Safety instructions for all operations
General Safety Warnings for Grinding
a)
This power tool is intended to function as a grinder. Read all safety warnings,
instructions, illustrations and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury.
b)
Operations such as sanding, wire brushing, polishing and cutting-off are not
recommended to be performed with this power tool. Operations for which the
power tool was not designed may create a hazard and cause personal injury.
c)
Do not use accessories which are not specifically designed and
recommended by the tool manufacturer. Just because the accessory can be
attached to your power tool, it does not assure safe operation.
d)
The rated speed of the accessory must be at least equal to the maximum
speed marked on the power tool. Accessories running faster than their rated
speed can break and fly apart.
e)
The outside diameter and the thickness of your accessory must be within the
S1M-FF05-180
S1M-FF05-230
2800W
2800W
8300 r/min
6600 r/min
φ180X6Xφ22
φ230X6Xφ22
Type 27
Type 27
5.0 Kg
5.0 Kg
-4-