Astera Lightdrop AL3-series 사용자 설명서 - 페이지 7

{카테고리_이름} Astera Lightdrop AL3-series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astera Lightdrop AL3-series 11 페이지.

4.2 Advantages

Wireless design --- The AL3 is easy for installation due to its integrated battery and

RF receiver.

Smart programing --- The AL3 not only displays complex color-changing programs

but also gives you the possibility to use your own customized colors for these pro-

grams when controled by an ARC2 Remote Control. The AL3 can be used as a stan-

dalone unit or grouped and paired with other Astera lamps and be controlled with an

ARC2 RF Remote Control.

Energy saving design --- Low working voltage, low power consumption and addi-

tional white LEDs helps to save up to 80% energy so it can reach a maximum opera-

tion time of up to 24 hours.

To power on the unit, hold the on/off button for 2-3 second.

To power off, press the on/off button shortly.

To choose basic colors or a rainbow effect, turn the unit on, then hold down the button and

keep the finger until the lamp turns into the blue blinking mode. Push the button several

times to cycle through the basic colors until the rainbow effect. When the desired color is

displayed, hold the button until the LEDs stop blinking and the lamp turns into normal oper-

ation.

To do a Factory Reset, turn the unit on. Then hold down the button and keep the finger

→

until: unit turns off

turns on blue blinking

turns off again

When the unit turns off for the second time, a factory reset was done.

While powered up, the indicator LED will show the battery charge state:

red – orange – green corresponding to the charge state

While charging, the LED will blink in green.