Akuvox SP-R52P 빠른 참조 매뉴얼 - 페이지 2

{카테고리_이름} Akuvox SP-R52P에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akuvox SP-R52P 2 페이지.

페이지 인쇄

Product Overview

Hook switch

LCD

Soft keys

Home key

Speaker

Navigation

keys

Numeric keypad

1.Power Indicator

Power on : green LED lights

Power off : LED off

2.Account Indicator

When account is activated, the green LED lights.

When new call is coming or the current call is on hold, the green LED flashes.

In the standby mode : LED off

1.If you are using DHCP to assign IP, simply press the OK button to view the phone IP, through a web browser to access

the phone in Account-> Basic page Register Account

2.If using Static allocated IP, Press Menu-> Settings-> Advanced Settings (password: admin) -> NetWork-> Lan Port->

Static IP set up IP, phone web browser to access the Account-> Basic page Register account number

1. Dial a number directly:

Input the number in the standby mode, then press # Send key or Send soft key to dial the number out.

SIP-R52 Quick Reference Guide

2. Dial a number in the call history:

a. In the standby mode, press History soft key;

b. Select the number that you want to dial, press Dial soft key.

3. Dial a number in the book:

a. In the standby mode, press Book soft key.

b. Access Local Phone Book -> All Contacts.

c. Select the contact that you want to call, press Dial soft key.

Power indication

Note: If the contact has more than one number,select the number you want to dial before pressing Dial key.

LED

Receiving a call

Line keys

Message key

There are two modes:

1. During a call, press Answer soft key to accept a second call or press Reject soft key to reject it.

Back key

2. When there is a new coming call (currently there is no call),lift the handset, press Handsfree key, Headset key

or Answer soft key to accept it.

Forward key

Hold a call

Phone book key

Headset key

Redial key

Press Hold soft key to hold the current call, then the LED on the corresponding line key flashes.

Handsfree

1. When a call is on hold, press Resume to cancel the holding or press Hold to keep the call.

2. As for multiple calls, press

Resume to cancel the holding or press Hold to keep the call.

Mute key

Mute a call

1. During a call, press

2. To resume the call, press

Conference call

1. During a call, press "New" key to set up a second call.

2. Hold the first call, then input the number that you want to join the conference call in the second call interface,

3. After the call is answered, press Conf key to set up a conference call.

4. Hang up to end the conference call.

Call Forward

1. Press Menu-> Features-> Call Forward to enter the setting.

2. Three modes are available: Always Forward, Busy Forward and No Answer Forward:

a. Always Forward: Select Always Forward, then input Forward to: A, press Save key. After the setting, all the

b. Busy Forward: Select Busy Forward, then input Forward to: A, press Save key. After the setting, when there

c. No Answer Forward: Select No Answer Forward, then input Forward to: A and set the Ring time as 30, press

keys to select the desired call, then press

key to mute the microphone.

key again.

press Send key.

new calls will be forward to A, and the LCD shows 1 forward call . The number of the forward calls will be

accumulated.

is a new call, press Refuse key to forward the call to A, and the LCD shows 1forward call .The number of the

forward calls will be accumulated.

Save key. After the setting, if a new call does not be answered after 30 seconds, the call will be forward to A,

and the LCD shows 1 forward calls. The number of the forward calls will be accumulated.

a .

c .