ASTLES SENSOLUTION C800 설치 및 운영 - 페이지 9
{카테고리_이름} ASTLES SENSOLUTION C800에 대한 설치 및 운영을 온라인으로 검색하거나 PDF를 다운로드하세요. ASTLES SENSOLUTION C800 20 페이지.
페이지 인쇄C800 Analyser Operating Manual
4.
(Back): Navigates to the previous screen. Hold the button for 2 seconds to return to the
primary display.
5.
(Down-Arrow): Allows you to scroll through various menus or decrease calibration values.
6.
(Enter): Will confirm selections in menus and calibration values. Pressing this button
when on the primary display will navigate to the main menu.
5. Pin Code
The C800 analyser pin code is "2000". This code
is required to access the instrument functions.
6. Hold Mode
The hold mode on the C800 analyser will fix the output current at the level it was at when the button
was pressed.
To initiate the hold mode either press the HOLD button or navigate to the HOLD menu and enable it
there. There is a 20 minute timer which can be restarted by pressing the HOLD button twice.
The displayed measurement will be unaffected by the hold mode.
902857-A - C800 Analyser Operating Manual.docx
9