Dongguan Yuehui Electronic Technology VS-808 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Dongguan Yuehui Electronic Technology VS-808에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dongguan Yuehui Electronic Technology VS-808 4 페이지.

used by the left and right handles, press L+R at the same time to enter Use status, the handle icon is displayed in the host

pairing interface after the connection is successful

If you use a single handle, press the left or down button to start the operation; if you use the left and right handles, press the

key to start the operation

② Connect the handle to the host again:

Press and hold any button on the handle to turn on the handle, the indicator light flashes slowly, and the corresponding set

of indicators is always on

Handle charging/sleep/wake-up function:

① When the handle is charged in the off state, the indicator light flashes slowly in a stream, and the four indicator lights are

always on when it is full. When charging in the Bluetooth connection state, the corresponding indicator light flashes slowly

and stays on when fully charged

② Sleep/wake function: the gamepad will sleep if it is not connected after 30 seconds, and will sleep if there is no operation

on the controller after 5 minutes

③ When the battery is low, the corresponding connection indicator flashes quickly.

Electrical parameters:

1. Working voltage: DC3.7V-4.2V 5. Charging voltage/current: DC5V/500mA

2. Working current: 30-35mA 6. Bluetooth transmission distance: <=8M

3. Continuous use: 10H 7. Battery capacity: 350mAh

4. Sleep current: 0uA 8. Standby time: 30 days when fully charged

Notes:

1. If the handle just bought cannot be turned on, you need to charge the handle before use

2. Please do not store this product in a humid or high temperature place;

3. Do not knock, beat, stick, puncture, or try to decompose this product, so as not to cause unnecessary damage to the

product;

4. The built-in battery of the product, please do not throw it away with garbage;

5. Do not charge the handle near fire or other heat sources;

6. Non-professionals should not disassemble this product, otherwise it will not be covered by the after-sales warranty

service.

Accessories:

BM-827S handle upgrade guide

This wireless controller is compatible with the latest version of the Switch host when it leaves the factory; after the controller

leaves the factory, once the Switch host is upgraded again, the controller cannot be connected to the host or the controller

itself has an upgrade function. In this case, the controller needs to be upgraded. Connect the handle to the computer with a

USB cable, and upgrade the handle by upgrading the software. Upgrade software can be obtained from the supplier of the

handle. Follow the upgrade procedure below to upgrade the handle.

On a Windows computer, double-click to upgrade the software, and the following window will pop up, and the "Start" font in

the window is dark black.

Rev 1.0

BM-827S Bluetooth SWITCH Handle Function Description