American Weigh Mini CD-300 사용자 설명서 - 페이지 3

{카테고리_이름} American Weigh Mini CD-300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. American Weigh Mini CD-300 5 페이지. Compact digital scales

I. OPERATION:

1. Place scale on a horizontal flat surface, press [I/O]

2. Wait until "0.0" is displayed.

3. Put the object(s) on the weighing platform.

4. Using the [M] key, you can switch between the weighing units.

II. TARE WEIGHING:

1. Turn on scale as described above.

2. Place the "tare item" on the platform.

3. Press [T] and wait until "0.0" is displayed.

4. Add the "net-weight-item".

III. CALIBRATION

Only perform calibration if there is a problem.

1. Turn on the scale by pressing the [I/O] key.

2. Wait for the scale to go to zero first, then press and hold the

[M] key until the display shows "CAL" then release it.

3. Press the [M] key again and the display will show "CAL" then

the required calibration weight will be displayed.

5. At this point, place the required calibration weight on the scale.

After a few seconds the display will show "PASS" then the weight

will display again.

6. Calibration is complete! You can now remove the weight and

turn off the scale.