Astone Media Gear AP-32B 사용자 설명서 - 페이지 8

{카테고리_이름} Astone Media Gear AP-32B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astone Media Gear AP-32B 20 페이지. Usb hd multimedia player

System Info: It displays the firmware version.

2. Video

Select this option to open the detail setting for video display.

Aspect Ratio: Select one among these options "Pan Scan 4:3, Letter Box 4:3, 16:9".

Pan Scan 4:3: Select for a full-height picture with both sides cut.

Letter Box 4:3: Select for the "wide screen" display with black bands on the upper and lower parts

of the TV screen.

16:9: Select this for a wide screen 16:9 TV.

*: When the video is in wider wide-screen-ratio such as 2.40:1, the both sides are still cut in

16:9.

HD Output: Use ▲▼ key to adjust the relative lightness or darkness for the TV picture.

Off: This is the default value. If your TV set doesn't support HD, please select this option.

720P: If your TV set is HDTV 720p, and you connect to the box via component video, you can

choose this option to get the 720p output.

1080i: If your TV set is HD-ready or Full-HD 1080i, and you connect to the box via component

video, you can choose this option to get the 1080i output.

3. Photo

Select this option to open the detail setting for the photo display.

Slide Show Timing: Choose from these options "Off, 2 Seconds, 5 Seconds, 10 Seconds, 30

Transition Effect: Choose from these options "Off, Cross Fade, Left to Right, Top to Bottom,

Waterfall, Snake, Dissolve, Strip Left Down and All Effect Shuffle". It decides the

transition effect for changing photos.

4. Audio

Select this option to open the detail setting for the audio playback.

Digital Output: Choose one between these options: "HDMI LPCM, HDMI RAW". Select the correct

Seconds, 1 Minutes and 2 Minutes". It decides the waiting time before changing

to the next photo while viewing photos.