Donner SPACLINE DMK 25 사용자 설명서 - 페이지 6

{카테고리_이름} Donner SPACLINE DMK 25에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Donner SPACLINE DMK 25 8 페이지. Mini midi keyboard
Donner SPACLINE DMK 25에 대해서도 마찬가지입니다: 매뉴얼 (9 페이지)

페이지 인쇄

Editing the Touch Bar

You can set various assignments for the Pitch and Modulation,including its CC(0-127) and CN(0-16)

message.(The operation method is the same as the pad)

Editing the Transport Button

You can set various assignments for each of the six transports buttons, including its CC(0-127) 、 CN(0-16) message and

Mode.(The operation method is the same as the pad)

Tip: See Auto-Populating the Transport to learn how to quickly apply common "patterns" of assignments to the knobs and

sliders, sparing you the time of having to select each assignment manually.

Editing the Pedal

You can set various assignments for the Pedal, including its CC(0-127) and CN(0-16)

message.(The operation method is the same as the pad)

Editing the Keyboard

You can set the keyboard's octave and transposition.

To transpose the keyboard, click the Transpose ﬁeld under the keyboard, and type the desired value (-12 to +12

semitones). A transposition of 0 means the keyboard is not transposed. For reference, the leftmost key will display its note

value to indicate the transposition.

To change the keyboard's octave, click the Octave ﬁeld under the keyboard, and type the desired value (-4 to +4

octaves) (this is the same as using your DMK25 mini's Octave buttons). An octave of 0 means the keyboard is at its

center/default octave. For reference, the leftmost key will display its note value to indicate the octave shift.

To select the MIDI channel of the keyboard send their messages, click the Channel ﬁeld and type the desired MIDI

channel number (1-16).

The Keyboard has four kinds of curves, as shown in the ﬁgure. The horizontal axis represents the force you press, and the

vertical axis represents the force output to the computer.

Curve 0

Curve 1

Curve 2

Curve 3