Donner SPACLINE DMK 25 매뉴얼 - 페이지 3

{카테고리_이름} Donner SPACLINE DMK 25에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Donner SPACLINE DMK 25 9 페이지. Mini midi keyboard
Donner SPACLINE DMK 25에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

페이지 인쇄

5. S1~S4

Assignable Sliders, can be assigned to send CC message.

Use the [S Bank] to switch Bank A or Bank B.

The MIDI Channel is assignable for each of them . The range is 0~16 (the same as the

Touch Bar).

6. PEDAL

Assignable Pedal, can be assigned to send CC message.

The MIDI Channel is assignable, The range is 0~16 (the same as the Touch Bar).

The Polarity of different pedals will be automatic recognized during the

7. KEYBOARD

The MIDI Channel is assignable, The range is

1~16;

4 touch Curve , The range is 0~3;

Use the [TRANSPOSE +/-] to change the pitch up/down by semi-tone, the range is -

12~12 . Press the [TRANSPOSE +] and the [TRANSPOSE -] at the same time will set

the transpose to 0;

Use the [OCTAVE +/-] to change the pitch up/down by octave, the range is

.Press the [OCTAVE +] and the [OCTAVE -] at the same time will set the octave to 0;

Multi-Function for EDIT;

SAVE/LOAD

4 Program Presets, PROG1~PROG4.

LOAD

Press [PAD BANK] and [PROGRAM] at the same time to enter the Loading state , the

LED of [PAD BANK] and [PROGRAM] blinking, press PROG1~PROG4 you want to

load the program preset , the PROG you press will lights if this PROG is not empty .

It will exit the loading state 3 second later after you press(or not press) one PROG , or

you can press [PAD BANK] or [PROGRAM] to exit the loading state quickly.

SAVE

Press [K BANK] and [S BANK] at the same time to enter the Saving state , the LED of

[K BANK] and [S BANK] blinking, press PROG1~PROG4 you want to save the

parameter , the PROG you press will lights.

It will exit the saving state 3 second later after you press(or not press) one PROG , or

you can press [K BANK] or [S BANK] to exit the saving state quickly.

power on.

-3~3