Astonica 50100081 사용 설명서 - 페이지 2

{카테고리_이름} Astonica 50100081에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astonica 50100081 2 페이지. Tosca oval table

PARTS & HARDWARE LIST

PART #

DESCRIPTION

Glass Table Top

Table Rim

Connector Ring

Table Leg

Bolt (6x15)

Bolt (6x30)

Flat Washers

Hex Wrench

Bolt Caps

Carefully remove the contents from the package.

If any parts are missing do not attempt to use the product until

they have been obtained and correctly installed.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-888-424-3354.

Caution: Do not over tighten fasteners.

QUANTITY

ASSEMBLY INSTRUCTIONS

FIGURE 1

1. Unpack all parts and spread them out on a flat, non-scratching surface.

2. Turn Table Rim (B) upside down.

3. Insert the 4 Table Legs (D) into the slots in the edge of the Table Rim (B) Thread a

M6x15mm Bolt (E) and Flat Washer (G) into each Leg (D) to secure them in place.

4. Attach each leg (D) to the Leg Connector Ring (C) with the 8 M6x30mm Bolts (F)

and Flat Washers (G).

5. Turn the table frame assembly right side up onto its legs.

6. Tighten all bolts (F) and (E) securely with the Angled Hex Driver (H)

7. Place plastic bolt caps (I) over each of the bolts (F).

8. Carefully slide the Glass Top (A) into place. The smooth side should be facing up.

Insert the plastic umbrella hole cap into the umbrella hole.