Donovan Hammer II 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Donovan Hammer II에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Donovan Hammer II 20 페이지. Arm system for belly dumps, end dumps, dump bodies & pups

페이지 인쇄

P/N 1809533 Rev. B

STEP 1: Locate points A and B. Point A is center

of tarp axle. Point B is desired resting

point for tarp tube. Refer to diagram

for locations of points A and B.

STEP 2: Locate and mark pivot point on bottom rail at equal distance between points A and B.

NOTE: Double check pivot loca-

tion before drilling any holes.

NOTE: To determine pivot point on opposite side of box, first make sure box is square. Transfer measurement from point A to pivot

point over to opposite side of box.

NOTE: Tapered, wedged, rounded or sloped trailers may require additional bracketry to offset and square arms with trailer.

equal distance

front

equal distance

pivot point

equal distance

pivot point

Locate Pivot Point

rear