Astonica 50104012 사용 설명서 - 페이지 2

{카테고리_이름} Astonica 50104012에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astonica 50104012 2 페이지. 42'' round wrought iron table

PARTS & HARDWARE LIST
PART #
DESCRIPTION
A
Table Top
B
Table Leg
C
Wing Nut
A
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
CAUTION: Do not over tighten fasteners.
QUANTITY
1
2
4
C
B
ASSEMBLY INSTRUCTIONS
Figure 1
B
C
1. (SEE FIGURE 1) Place table top (A) upside down on a non-scratching surface
such as a piece of carpet, blanket or large towel.
2. Turn one of the two-leg assemblies (B) upside down so that the holes at the
top of the legs slide onto the threaded studs mounted underneath the
table top (A). Then do the same with other leg assembly. The center support
holes should fit flush together.
3. Screw 1 wing nut (C) onto each threaded stud and tighten securely.
4. Have someone help you turn the table right side up.
5. All four legs should sit flat. If the table rocks, you have the leg assemblies
mounted in reverse order. If so, repeat steps 1 - 3 reversing the placement
order of the legs.
A