Astonica 50104014 사용 설명서 - 페이지 2

{카테고리_이름} Astonica 50104014에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astonica 50104014 2 페이지. Lisbon 60'' patio table

페이지 인쇄
Astonica 50104014 사용 설명서
PARTS & HARDWARE LIST
PART #
DESCRIPTION
A
Table Top
B
Leg Assembly Part 1
C
Leg Assembly Part 2
D
Wing Nut
E
Plastic Center Hole Bushing
A
C
Carefully remove the contents from the package. If any parts are missing
do not attempt to use the product until they have been obtained and
correctly installed.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Caution: Do not over tighten fasteners.
QUANTITY
1
1
1
4
1
B
D
E

ASSEMBLY INSTRUCTIONS

1. (See Figure 1) Place the table top (A)
upside down on a non-scraching surface.
2. (See Figure 2) Turn the leg assembly (B)
upside down so that the holes at the top
of the assembly slides onto the threaded
studs that are pre-mounted underneath
the table top (A). Attach the wing nuts
(D) to the threaded studs and
tighten securely.
3. (See Figure 3) Slide the Plastic Center
Hole Bushing (E) onto the center hole
ring of leg assembly (C) repeat 2nd step
with Leg Assembly (C). The center
support holes should fit flush together.
Attach the wing nuts (D) to the threaded
studs and tighten securely.
4. (See Figure 4) Turn the assembled table
right side up.
Note:
All four legs should sit flat.
If the table rocks, you have
the leg assemblies mounted
in reverse order.
If so, repeat step 2 reversing
the placement order of the
legs.
FIGURE 1
A
FIGURE 2
B
A
FIGURE 3
C
E
D
D
A
FIGURE 4