Astonica 50105597 사용 설명서 - 페이지 2

{카테고리_이름} Astonica 50105597에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astonica 50105597 2 페이지. Claremont 42'' round table

PARTS AND HARDWARE LIST

PART #

Table Top

Leg

Support Ring

Adjustable Foot

Threaded Stud, 8mm

Hex Nut, 8mm

Flat Washer, 8mm

Lock Washer, 8mm

Carefully remove the contents from the package. If any parts are missing do not

attempt to use the product until they have been obtained and correctly installed.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,

DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT

1-888-424-3354.

NOTE: This product is intended for residential, non-commercial use.

DESCRIPTION

QUANTITY

Figure 1

CAUTION: Do not over tighten threaded studs, aluminum is a soft metal

and threads can easily be stripped.

1. (SEE FIGURE 1) Place table top (A) upside down on a flat, non-scratching surface.

2. Locate threaded holes under table top (A), and install threaded studs (eight places).

3. Install threaded studs (E) into table legs (B). Repeat with other three table legs (B).

4. Place table leg (B) upside down, and mount legs to table using mounting hardware,

flat washers (G), lock washers (H) and nuts (F).

5. Align support ring (C) and one table leg (B). Ensure ring tabs on support ring are facing

upward, join with mounting hardware flat washers (G), lock washers (H) and hex nuts (F).

Hand tighten only to hold it in place. Repeat with other three table legs.

6. Stand the table upright and securely tighten hardware in an "X" pattern.

7. Fix the adjustable feet (D) under table legs (B). Adjust feet until table stands level.

ASSEMBLY INSTRUCTIONS