AmeriGlide Stair Lift 설치 매뉴얼 - 페이지 6

{카테고리_이름} AmeriGlide Stair Lift에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AmeriGlide Stair Lift 15 페이지. Stair lift

I N S T A L L I N G

Use the track bracket bolts to

fasten brackets to nuts in the

track channel.

Position track brackets as follows:

a) 1 bracket pair on bottom step

b) 1 bracket pair on top step

c) 1 bracket pair above and below

where the tracks splice together

Hand tighten the bolts only - the

brackets will need to slide for

correct positioning.

8 Splice bars are used to join the track sections together. Locate the splice

bars and loosen the set screws from their shipping position. Slide the

splice bars to half way and tighten the two set screws remaining in the

track to hold them in place. The tracks will not slide together if the set

screws protrude beyond the splice bar.

ALLEN WRENCH

splice bar

Slide the upper track section onto the lower

track section. Tighten the splice bar set screws

to lock tracks together.

CAUTION: Do not put your fingers between the

track sections at any time as injury could occur.

T H E

L O W E R

detail of track section

showing position of splice bars

T R A C K S

do not remove foam

packing

NOTE: attach a bracket on the bottom nut,

but leave the nut second from the bottom

unused – it will be used later.

ALLEN WRENCH

splice bar