Astonica Benson 사용 설명서 - 페이지 3
{카테고리_이름} Astonica Benson에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astonica Benson 3 페이지. Multi-purpose fire pit
페이지 인쇄ASSEMBLY INSTRUCTIONS
CAUTION: Do not over tighten fasteners.
1. (FIGURE 1) Place all 4 tabletop frame pieces (B)
on a non-scratch surface upside down to
form a square. Use Bolts (L) to attach pieces.
2. (FIGURE 2) Attach connector brackets (F) to
leg posts (A) by using flathead bolts (N).
Tighten the bolts (N) with the hex key (K).
3. (FIGURE 3) Attach the leg assembly (A,F) to the
tabletop frame (B) using bolts (M). Make sure
the holes in the middle of the leg posts
face inward.
4. (FIGURE 4) Mount leg supports (G) to the
holes in the middle of the leg posts (A) using
bolts (L). Tighten all the bolts with the hex
key (K) until all pieces fit together securely.
Figure 1
B
B
L
Figure 2
A
F
N
K
Figure 3
M
B
F
Figure 4
A
A
2
5. (FIGURE 5) Turn the assembled fire pit frame
right side up on a flat surface. Place fire box (C)
on the base and place log grate (H) inside.
Place grill grate (D) on the fire box (C). Insert
the log rack (J) underneath the fire box on
the leg supports (G). Option 1:The fire pit can
now be used for cooking.
L
6. (FIGURE 6) Option 2: Remove grill grate (D).
Place the coffee tabletop (I) on top of fire
box (C). The fire pit can now be used as a
coffee table.
A
M
7. (FIGURE 7) Option 3: Remove coffee tabletop.
Place the fire screen lid (E) on top of the fire
box. Thread the fire screen ring (P) in the hole
on top of the lid. The fire pit is ready to be used
as a fire pit.
L
G
ASSEMBLY INSTRUCTIONS
Figure 5
G
Figure 6
Figure 7
3
D
H
C
J
I
C
P
E