Amerihome BS199GSET 조립 지침 - 페이지 2

{카테고리_이름} Amerihome BS199GSET에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Amerihome BS199GSET 2 페이지. Bar stool

ASSEMBLY INSTRUCTION

DISASSEMBLY INSTRUCTIONS

To remove the Seat Top from the Support Cylinder, turn the stool upside

down, and strike the edge of the Support Cylinder several times where it

meets the support. The Support Cylinder and Base Plate and Leg will

separate with applied force.

201911

1. Use the hex key (F) to attach the Support

Cylinder (C) to the underside of the Seat (A)

with the provided hex bolts (E).

2. Locate Black Cap on Support Cylinder.

3A. A Black Cap protects the hydraulic

mechanism on the Support Cylinder (D).

3B. Remove the Black Cap and discard it

before assembly. The Orange hydraulic

button will become visible.

4. Insert the Support Cylinder (D) into the

Support Cylinder (C) and press firmly.

5 Insert the thicker end of the Support

Cylinder into the center hole of the Base,

and press down FIRMLY.

(To raise the seat, grasp the Handle and pull

upward without applying any weight. To lower,

raise the handle upward and apply weight to the

seat.)

Turn the stool upside down. Hit the Metal Clip

several times located in the exact center of the

bottom of the Base with a rubber mallet to

disengage the locking mechanism. The Base will

separate from the Seat Top and Support Cylinder.

Assembled

Bar Stool

Metal Clip