Astor A 53 운영 매뉴얼 - 페이지 15

{카테고리_이름} Astor A 53에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astor A 53 20 페이지. Manual toggle press

2.3

Setting up the machine / commissioning

Place the machine on level ground. A stable workbench, for example, is appropriate. Before

using the press, it is essential to secure the machine using the 2 holes. Always lift the

press on the casting and base, never on the hand lever or between the hand lever and the

cast body.

Swing the machine swivel plate to the left until it stops. Raise both locking bolts of the swivel

plate and turn the two holders 90° to the left or right.

Place the mounting plate with the tool A and B lower parts bolted on over both studs on the

machine swivel plate. Unscrew the two holders until the locking bolts engage audibly

Pull out the index pin of the catch clockwise by its knob as far as it will go and hold it in this

position. Push in the tool upper part bolt head (pointing forward) with the holding pin into the

receiving hole of the machine until it stops. Release the knob and move the tool upper part

back and forth briefly until the index pin engages in the lateral hole of the holding pin. Ensure

that the index pin is locked by pulling the upper part downwards.

2017-03-23

15 of 20