Akuvox A05 Series 빠른 매뉴얼 - 페이지 2

{카테고리_이름} Akuvox A05 Series에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akuvox A05 Series 8 페이지.

Installation

1. Step1: Wall-mounting Bracket Installation

1.1 With embedded one-gang junction box (86x86 mm or 2x3 inches in size) in the wall

1.1.1 With 86x86 mm embedded junction box in the wall

Fix the wall-mounting bracket on

the embedded box with two

M4x30 screws.

Fix the wall-mounting bracket

with two M4x30 screws and

two ST4x20 screws.

1.1.2 With 2x3 inches embedded single-gang box in the Wall

Fix the wall-mounting bracket on the single-gang

junction box with the two M4x30 screws.

Mark the two positioning

holes of the wall-mounting

bracket on the wall.

Insert two plastic wall

anchors into the two

drilled holes.

E16/A05

Remove the two M4x30 screws

and take oﬀ the wall-mounting

bracket.

Use a hand drill with 5 mm diameter

bit to make two positioning holes

with 25 mm in depth in the marked

positions.

Finish the bracket installation.