Acer XG270HU 사용자 설명서 - 페이지 19
{카테고리_이름} Acer XG270HU에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer XG270HU 31 페이지.
페이지 인쇄
INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1 Connect Digital Cable (Only Dual-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the monitor
and connect the other end to the computer's port.
1-2 Connect HDMI Cable (Only HDMI-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
Or connect the MHL cable (Only for MHL-Input Model)(Optional) to the
portable device.
1-3 Connect DP Cable (Only DP-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer.
2. Connect the Audio Cable (Optional)
3. Connect the adapter
a. Connect the AC cord to the adapter.
b. Connect one end of the adapter to the monitor and the other end to
a properly grounded, AC outlet.
4. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
5. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.
Downloaded from ManualMonitor.com Manuals
DC-IN
AUDIO-IN
DP
DVI-D IN
HDMI
DC
DP
DC-IN
AUDIO-IN
EN-10
HDMI
DVI
DP
DVI-D IN
HDMI