Door Knox VDP103 매뉴얼 - 페이지 4

{카테고리_이름} Door Knox VDP103에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Door Knox VDP103 15 페이지.

VDP103

Introduction

New VDP103 from serial number HBY00401 onwards has new firmware that is setup and

programmed from the keypad.

Prior to this serial number the VDP103 required access to the back of the unit to add cards or

PIN numbers.

With a stylish brushed aluminium finish and quality build the VDP103 is ideal for retail and

commercial projects. As well as functioning as a standard door entry camera, trusted users

can also activate the door release and enter the building using the VDP103 with either a

programmable key code or key fob (2 key fobs supplied, additional cards and key fobs

available. Order Codes:- Cards

VDPCARD01

or Fobs VDPFOB01).

A 6 digit PIN can be set up for access without a card or fob.

A maximum of 200 cards or fobs can be paired to a single VDP103. Each card or fob however

can be paired to multiple door cameras so the same card or fob can be used to open

multiple doors.

You will need to pair the card or fob to each door entry unit separately.

Built in Anti-Tamper, this is designed to be triggered when the unit is moved but maybe

triggered if it is laid flat. See

Anti-Tamper Alarm