Door Knox XVDP500 매뉴얼 - 페이지 2
{카테고리_이름} Door Knox XVDP500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Door Knox XVDP500 6 페이지. Entry system
페이지 인쇄Safety Instructions
1.
Ensure that the indoor monitor is not subject to high temperature or high humidity and must
not subject to direct sunlight.
2.
The indoor monitor must not be installed close to a television as this may cause interference.
3.
The indoor monitor should not be handled with wet hands.
4.
Clean the indoor monitor and camera with a soft cloth and do not use liquids or solvents.
5.
Ensure that the equipment is not subject to shock.
6.
It is recommended to not point the camera at direct sunlight as this may affect picture
quality.
7.
To prevent damage the indoor monitor should be fastened to a wall.
8.
Always use a 12vDC >1.1A regulated power supply.
Installation Instructions
Connecting Indoor Monitor
1. Connect a fly lead to B.
2. Connect wires to white
extension cable using a terminal
connector (not supplied) noting
cables used for audio, ground,
power and video.
3. Connect power supply to A but
do not power up yet.
4. If you are installing a second
camera connect second fly lead
to C and follow step 2.
Email:
Door Entry System - Door Knox
A
B
C
Audio Ground VCC Video
12v DC
Last Revised: 07/10/2015
Doc XVDP500