Astra HD8Ec 매뉴얼 - 페이지 4

{카테고리_이름} Astra HD8Ec에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astra HD8Ec 15 페이지.

ASTRA HD8Ec

Injection phases

Figure 227

1. Fuel valve

2. Pumping element

3. Fuel discharge

4. Filling and flowing back channel

Filling phase

During the filling phase, the pumping element (2) moves to

its upper position.

The highest cam position is passed and the rocker roller gets

closer to the cam basic circle.

The fuel valve (1) is open and the fuel can flow into the

injector from the lower channel (4) of the cylinder head.

The filling phase continues until the pumping element has

reached its upper end-of-stroke position.

SECTION 3

Figure 228

60669

1. Fuel valve

2. Pumping element

3. Fuel discharge

4. Filling and flowing back channel

Injection phase

The injection phase starts when, during the pumping element

descending phase, the solenoid valve is energized and the fuel

valve (1) closes. Delivery start time, properly processed by

the electronic control unit, depends on engine operating

conditions. Through the rocker, the cam continues to

activate the pumping element (2) and the injection phase

continues as long as the fuel valve is closed (1).

ENGINE - F3B

133

60670