Ameristar TransPornt II 사용 설명서 - 페이지 4
{카테고리_이름} Ameristar TransPornt II에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ameristar TransPornt II 7 페이지. Ornamental cantilever gate
페이지 인쇄3.
For gate openings greater than 24 feet, top & bottom enclosed tracks are required to be spliced. Align short left
track (UL) to long right track (UR) and insert splice block as shown in Figure 2A. Line up pre-drilled holes,
attach with frame bolts (E1), splice bolts (E2), flat washers/lock washers (J), and frame nuts (H). Tighten all
nuts thoroughly. Align long left track (LL) to short right track (LR) and insert splice block as shown in Figure
2B. Line up pre-drilled holes, attach with frame bolts (E1), splice bolts (E2), flat washers/lock washers (J), and
frame nuts (H). Tighten all nuts thoroughly.
Figure 2A
UL
Note: Frame bolts (E1) are used along the side of the track in conjunction with flat washer, lock washer (J) & frame nut (H) assembly.
4.
Position top and bottom tracks parallel to each other. Allow sufficient space to layout uprights between and per-
pendicular to tracks (see Figure 3). Ensure correct orientation of each upright. Slide uprights into top track and
align with pre-drilled holes. Attach with frame bolts (E1), flat washers (J), and frame nuts (H). Finger tighten.
Bring bottom track over bottom of uprights and align with pre-drilled holes. Attach with frame bolts (E1), flat
washers (J), and frame nuts (H). Finger tighten.
Top & Bottom Enclosed Track
Gates > 24' opgs
4
|
888-333-3422
AMERISTARFENCE.COM
PART # TP-II INST | 07/2018
E2
Lock Washer (J)
LR
Flat Washer
"TOP" inserts into tracks
UL
marked "UL & "UR"
Figure 3
LOCK WASHER
E1
LL
UL
Figure 2B
FLAT WASHER
Top Enclosed Track
All Gates
Bottom Guide Track
Gates < 24' opgs
LR
A
4