astra telematics AT242 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} astra telematics AT242에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. astra telematics AT242 5 페이지.

version 1.0

4. Check status LEDs

a. Place the AT242 somewhere with reasonable view of the sky in correct orientation

(PCB side with GPS patch antenna & battery facing to the sky) for a minute or two and

then check the status LEDs as below:

a. During normal operation the LEDs should:

GNSS:

GSM / LPWAN:

5. Fit the enclosure cover

a. Align the AT242 PCB with the slots in the main part of the enclosure and slide in the

PCB and end panel assembly until the clips are mated

Constant ON

Double flash every sec

Flash @ rate 1 per 5 sec

200mS ON / 1800mS OFF

1800mS ON / 200mS OFF

Constant OFF

Mobile Comms Status

GNSS Status

Searching for initial fix

GNSS 3D navigation

Lost GPS navigation

GSM ON

GSM registered on network

GSM Modem OFF