Akva Modulex Q 2016 매뉴얼 - 페이지 3

{카테고리_이름} Akva Modulex Q 2016에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akva Modulex Q 2016 3 페이지.



The lower part of the cover is positioned with the AKVA logo at the foot end. The top cover

is zipped off and put aside. The fixing paddles are put through the holes in the lower part of

the cover and fixed to the bottom plates.



At first the long sides of the foam frame are placed in the cover, then the head and food end

parts.

Modulex has sloaping sides, and Modulex Q has straight sides.

Shown here is the Modulex:



The heater(s) is positioned, and the wire is led under the foam frame and through the hole

in the lower part of the cover. (See assembly instructions Akva Vital Electronics heater

before installing the heater.)



The safety liner Zipliner is placed in the bed and zipped onto the cover.



If this is a bed with a dual mattress system the divider is now placed in the middle.



The water mattress(es) is placed in the safety liner. (See instructions for water mattresses.)



After filling the mattress, removing the surplus of air and adding one or two bottles of Long

Life the top cover is zipped on the lower part of the cover. (See instructions for covers.)