Akva Modulex SELECT with headboard 매뉴얼

{카테고리_이름} Akva Modulex SELECT with headboard에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akva Modulex SELECT with headboard 6 페이지.

AKVA Modulex SELECT with headboard

1. Assemble the base frame. See assembly instructions for Big Box without headboard.

2. The bottom plates are placed on the base and attached by the screws. The threaded

bushings of the bottom plates must face up as illustrated.

3. The 2 legs at the head end are fastened with screws. A lock washer is placed between the

leg and the bottom plate.

4. Place the drawers with the front opening facing up. The front panels of the drawers are

positioned on the dowels, and the socket screws in the side pieces are fastened.

Note: Do not lift the drawer until the next point has been done, because the sides of the

drawers are not stabilized yet.

Base with drawers (see 3-6)