DoorBird D21 Series 빠른 시작 매뉴얼
{카테고리_이름} DoorBird D21 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorBird D21 Series 2 페이지. Display module and keypad with 16 keys
DoorBird D21 Series에 대해서도 마찬가지입니다: 연결 매뉴얼 (6 페이지), 매뉴얼 (4 페이지), 매뉴얼 (2 페이지), 설치 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (2 페이지)
페이지 인쇄
HOW-TO SERIES
How to configure the users for multi-tenant DoorBird models
Requirements:
DoorBird IP Video Door Station D21x multi-tenant model (e.g. D2102V, D21DKH)
Introduction:
The DoorBird includes a configured administrator login and one user to add the device to your DoorBird
App. This information is available on your Digital Passport / Quickstart Guide.
These standard settings require additional configurations. The following guide shows how to configure the
DoorBird D21x series for two tenants.
Please follow these steps:
1) Make sure your device is online: https://www.doorbird.com/checkonline
2) Log into the administration of the DoorBird App (Settings -> Administration -> Login) with your
administration login user (e.g. bbbbbb0000).
3) Click on "Settings" (depending on the model of your DoorBird IP Video Door Station) as shown below:
4) Set up your key codes (0001/0002 in the example) or buttons (J1 is the top button, J2 is the bottom
button)
5) Back in the administration menu, click on "Add" and create as many users as you have key codes /
buttons (the administration user bbbbbb0000 does not count). Then assign a key code / button to each user
("assign doorbell").
1/2
Copyright 2018 Bird Home Automation GmbH - www.doorbird.com - [email protected] – All companies, logos and product names are trademarks or registered trademarks of the respective companies. Stand 01.08.2018