AMERITRON AL-1500 사용 설명서 - 페이지 2
{카테고리_이름} AMERITRON AL-1500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMERITRON AL-1500 16 페이지. Full power linear amplifier
페이지 인쇄
1. Carefully remove the amplifier, transformer, and tube from their shipping cartons.
Inspect each item for visible damage. If any damage occurred during shipment,
notify the transportation company immediately.
2. Save all packing materials in case you need to return your AL-1500(X/J) for factory
service. The cartons have been designed to give maximum protection for this
amplifier. Any units returned without proper packing may be damaged and shipping
claims cannot be made. Contact the factory before returning any units.
3. Remove the screws that hold the cover to the amplifier. Slide the cover back and
remove it from the amplifier. There is a small bag that contains the fuses, fuse caps
and the remainder of the chassis screws wrapped in the packing material around the
anode connector.
4. Please read the GENERAL INFORMATION and SPECIFICATIONS sections before
attempting to install the transformer and tube. Please note that the tube chimney comes
factory installed around the tube socket. Go to the INSTALLATION section on page 4
to begin installing the transformer and tube.
5. This amplifier must always be disconnected from the power mains before removing
the cover. See the precaution on page 10. Please read the entire manual to become
familiar with the operation of the AL-1500(X/J) amplifier.
NOTE: The AL-1500J is the Japanese export version of the AL-1500 amplifier. The
AL-1500J utilizes a special power transformer for use with 200V AC, 50 Hz. The
AL-1500J will perform to specifications with the special transformer installed and
will cover 24 and 28 MHz.