Dabi Atlante COBRA CONTRA ANGLE INTRA SL 30 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Dabi Atlante COBRA CONTRA ANGLE INTRA SL 30에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dabi Atlante COBRA CONTRA ANGLE INTRA SL 30 20 페이지.

OPERATION OF EQUIPMENT

Coupling to the micromotor

Ensure that the connection of the instrument is compatible with that of the equipment. In order

to couple it, press the instrument on the coupling of the micromotor until it is fastened (fig. a). To

uncouple, by means of pressure, pull out the Handpiece.

Before putting it into operation for the first time, follow lubrication procedures (see page 14).

Warning

Never place or remove the instrument when the micromotor is functioning.

Fastening of Bur type lock blade (32 CA / SL 30)

fig. a

Turn the lever in a counterclockwise direction (fig. a).

Insert the bur in the hole and turn it until locking on the limiter (fig. b).

Upon touching the limiter with the bur turn the lever to the start direction to lock the bur (fig. c).

Fastening of Bur type Push Button (32 CA PB / 32 CA PB SPRAY / SL 30 PB)

fig. c

fig. b

fig. a

fig. b

On PB (Push Button) system, fit the bur into

the guide and turn it until it locks on limitator

(fig. c). Then press the head button and move

fig. d

the bur until it reaches the end of the limitator,

releasing the head button (fig. c).

Warning

Make sure that the bur is fitted up to

the end for a proper fixing (fig. d). Use

standardized burs of a good quality.

Burs with very long shanks can produce

excessive vibration reducing the useful

life of the bearings.

fig. c