DoorHan SECTIONAL-500PRO 설치 및 운영 매뉴얼 - 페이지 12

{카테고리_이름} DoorHan SECTIONAL-500PRO에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan SECTIONAL-500PRO 18 페이지. Operator

6. MANUAL OPENING

OPENING BY MEANS OF INTEGRATED CARRIAGE RELEASING DEVICE

Manual disengagement of automatic system

In the event of main power failure

In the event of main power failure, the operator can be switched to manual control. To do this, pull down the releasing

device cord. The carriage should withdraw from the engagement, amd after that the door can be operated manually

(Fig. 7).

When main power is restored

When main power is restored, the operator is to be set to automatic control. To do this, move the carriage into the

locked position by pulling the releasing device cord to youself (Fig. 8). After this, trigger a signal from the remote control

or control button, wait till the carriage clutch with chain (belt).

IMPORTANT! When the carriage is blocked, the door will move automatically only after the carriage meshes with

the chain support.

Manual door control

Figure

Locked position

Automatic door control

Figure

Unlocked position

MANUAL OPENING

Pull the cord down and

Unlocked position

move the rod to the

position shown in the

Figure

Pull the cord down and

Locked position

move the rod to the

position shown in the

Figure