DoorHan SECTIONAL-500PRO 설치 및 운영 매뉴얼 - 페이지 6

{카테고리_이름} DoorHan SECTIONAL-500PRO에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan SECTIONAL-500PRO 18 페이지. Operator

4. OPERATOR INSTALLATION

Set of spanners

Set of slotted and cross screwdrivers

Set of drills for metal

4.2. REQUIRMENTS TO DOOR INSTALLATION

P rior to installation check if the door is



properly balanced and moves smoothly when

automatically operated.

M ake sure, that minimal clearance between



the ceiling and the top point, when the door is

moving, is not less than 45 mm (pic. 1).

C heck, that the door leaf top roller is in the



horizontal part of the guide rail, when the door

is completely closed (pic. 2).

M ount the door control panel at a height not less



than 1.5 m close to the door.

4.3. CONNECTION OF OPERATOR AND GUIDE

1. Put the operator bushing (4) on the shaft (5).

2. I nsert the operator unit into the hole on the

guide (3).

3. F asten the operator with U-brackets (2) and

tapping screws (1).

Set of drills for concrete

Pliers

Hacksaw for metal

Tapping screws

U-bracket

Guide

Bushing

Motor shaft

Electric drill

Tape measure (folding rule)

45 mm

Pic. 1

OPERATOR INSTALLATION

Pic. 2