DoorHan SECTIONAL-800PRO-CE 설치 및 운영 매뉴얼 - 페이지 6

{카테고리_이름} DoorHan SECTIONAL-800PRO-CE에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan SECTIONAL-800PRO-CE 20 페이지.

4. OPERATOR INSTALLATION

4.1. TOOLS

1. Set of spanners

2. Set of slotted and cross screwdrivers

3. Set of drills for metal

4.2. REQUIRMENTS TO DOOR INSTALLATION

1. Prior to installation check if the door is properly balanced and moves smoothly when automatically operated.

2. Make sure, that minimum clearance between the ceiling and the top point, when the door is moving, is not less than

45 mm (fig. 1).

3. Check, that the door leaf top roller is in the horizontal part of the guide rail, when the door is completely closed (fig. 2).

FIG. 1

4.3. CONNECTION OF OPERATOR AND GUIDE

1. Put the operator bushing (3) on the shaft (6).

2. Loosely tighten the drive mounting screws (7).

3. Insert the operator unit into the hole on the guide (2).

4. Fasten the operator with U-brackets (1) and tapping screws (7).

FIG. 1

1. U-Bracket

2. Guide

3. Bushing

4. Set of drills for concrete

5. Pliers

6. Hacksaw for metal

FIG. 2

45 mm

4. Plug terminals for connection of accessories

5. Micro-switch reference point

6. Motor shaft

OPERATOR INSTALLATION

7. Electric drill

8. Tape measure (folding rule)

7. The drive mounting screws