DoorHan SLIDING-1300 설치 및 운영 매뉴얼 - 페이지 4
{카테고리_이름} DoorHan SLIDING-1300에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan SLIDING-1300 16 페이지. Drive
DoorHan SLIDING-1300에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (12 페이지), 설치 및 운영 매뉴얼 (12 페이지)
페이지 인쇄
2.
sAFetY InstRUCtIons
IMPoRtAnt! Read carefully this manual to ensure safe installation and operation, improper installation and use can
cause injury to people.
•
Save this manual for future reference by maintenance during the whole operating period of the operator.
•
The SLIDING 1 300/2100 operator is intended for automation of sliding door. Do not use the operator for other than
intended purposes.
•
Be sure that the door moves smoothly.
•
Turn off the power supply before installation and maintenance.
•
Use the tools specified in section "Tools" of this manual.
•
When performing operation at a height, use a stable support.
•
When drilling holes, use protection for hands and eyes.
•
The operator is not intended for installation at a height exceeding 2 500 mm.
•
For fastening of the item, use hardware supplied with the operator or other analogous one.
•
Do not make any changes in the automatic system not specified in this manual.
•
Do not install the equipment in premises containing quick inflammable substances or other dangerous environments
as it can cause explosion or fire.
•
Do not use the operator if it needs repair or adjustment as installation defects or unbalanced door can cause injury.
•
Mains supply shall be connected to the automatic system via automatic switch with a minimal distance of 3 mm
between the neighboring contacts. It is recommended to use a 6А automate.
•
Remove package of the item and dispose of it. Keep the package materials away from children.
•
Make sure that no objects are located within the door's range of travel.
•
Never let children play in the door's range of travel. Keep all remote control units of the operator and stationary
control buttons out of the reach of children.
•
passage is only allowed when the gate has stopped and the operator is off.
•
DOORHAN shall not be held responsible in case of injury caused by misuse of the product.
•
DOORHAN shall not be held liable in case of improper installation of the item and damage arisen during operation.
•
DOORHAN is not responsible for unstable work of the automatic system when using safety devices and accessories,
which are produced by other manufactures without agreement with DOORHAN.
•
It is highly recommended to use DOORHAN optional equipment as the accessories produced by other manufacturers
can damage the automated system.
•
When carrying out maintenance, it is recommended to use the DOORHAN original spare parts.
•
Be sure that after completion of installation the installer has shown the user how to release the door in case of
emergency and has given instructions on proper operation and maintenance of the automated system.
•
Repairs may be carried out only by qualified personnel who was trained and certified at the authorized DOORHAN
centre.
•
The Sliding automatic system does not require any special servicing.
•
Check regularly the installation, particularly cables, for signs of wear or damage.
•
Check the safety sensors monthly.
•
Carry out maintenance of the automatic system at least every six months, checking the gate for smooth travel when
the release is activated, and the release for proper operation.
•
It is forbidden to carry out any actions which are not allowed by this manual.
IMPoRtAnt! RIsK oF InJURY!
Have a qualified technician lay the cables 230 V AC. The cables must be laid in protective corrugated tubes. Avoid
contact of cables and moving parts of the door. In case of supply cable damage, use the suitable type of the cable.
Materials needed for installation of the sLIDInG operator and accessories (if available).
•
Cable 2 × 0.5 mm
•
Cabel 4 × 0.5 mm
•
Cable 3 × 1.5 mm
•
The cables shall have isolation handling the required voltage.
4
(photocell transmitter, stepped control button).
2
(photocell receiver).
2
(power supply).
2