DoorHan SLIDING-2100 설치 및 운영 매뉴얼 - 페이지 3
{카테고리_이름} DoorHan SLIDING-2100에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DoorHan SLIDING-2100 12 페이지. Drive
DoorHan SLIDING-2100에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (16 페이지), 설치 및 운영 매뉴얼 (12 페이지)
페이지 인쇄
1. OVERVIEW
Sliding-1300/2100 drive servies to automatic control of sliding doors without gate.
It consists of a mechanical gearbox in oil bath and an electric motor with integrated control unit. Both gearbox and motor are
made in a single package. The rotary movement of the output sprocket is converted into linear motion of door with a gear rack
fixed on the door.
External control button is connected to the control unit.
Self-locking gearbox provides door mechanical block, if the motor does not operate. In case of blackout, emergency manual
release mechanism allows to open and close the door manually.
1.1. Main functions
•
Automatic stop system stops the motor quickly and reliably at the extreme positions.
•
Stop at the extreme positions is carried out due to activation of contactless electronic limit switches.
•
In case of blackout, rotation of the lever releases the drive, whereupon the door opening is possible by hand chain.
Drive control can be carried out in step-by-step mode (open-stop-close-stop) with fixed button or remote controller.
•
Control unit is set inside the drive housing with a gear motor. The drive has a low noise level and overheating protection.
Sliding-1300/2100 automatic drive serves to operate sliding door. Do not use it for other purposes
1.2. Technical specifications
Model
Supply voltage, V/Hz
Rated power, W
Gear ratio
Gear rack, mm
Gear
Maximum linear force, N
Maximum torque, Nm
Thermal protection, °C
Intensity, %
Operating temperature range, °C
Degree of protection
Maximum door weight, kg
Door speed, m/min
Control block
Limit switches
Capacitor capacitance, uF
1.3. Complete set
The drive should be unpacked and inspected upon delivery to ensure the drive is free from damages. If any damages, please,
contact the supplier of the drive.
The parts included in the standard complete set of drives series Sliding are given in the following table.
№
1
2
3
4
5
6
7
8
9
Item
Sliding-1300/2100 in oil bath with integrated control unit
Limit switches (open/close)
Installation base for concrete pouring
Hardware kit
Release mechanism keys
Switch key
Gear rack (1 m)
Safety photocells
Warning light
Sliding-1300
220-240/50
550
1:32
М4 × 12,566
Z16
900
27,5
125
70
–40...+40
IP54
1 300
10
PCB-SL
Magnetic
22
OVERVIEW
Sliding-2100
800
1 350
43
2 100
37
Quantity
1 pc.
1 couple
1 pc.
1 pc.
2 pcs.
1 pc.
4 pcs.
1 couple
1 pc.
3