Canon PIXMA MP495 Series 네트워크 설정 매뉴얼 - 페이지 9

{카테고리_이름} Canon PIXMA MP495 Series에 대한 네트워크 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP495 Series 24 페이지. Cartridge reset
Canon PIXMA MP495 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (22 페이지), 네트워크 매뉴얼 (20 페이지), 매뉴얼 (8 페이지), 네트워크 설정 매뉴얼 (9 페이지), 매뉴얼 (4 페이지)

페이지 인쇄
Canon PIXMA MP495 Series 네트워크 설정 매뉴얼

Other Troubleshooting Tips

Forgotten or Do Not Know the Access Point Name/Network Name
(SSID), Security Protocol (encryption standard), and Network Key
Check
Check the access point settings.
•
For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.

The Machine is Not Detected after the Network Environment is Changed

Check
Wait until the IP address is assigned to the computer. You may need to restart your
computer.
•
Search for the machine again after confirming a valid IP address is assigned to the computer.
Glossary
•
IP address
A numerical identification assigned to each computer or network device connected to a network.

Reference Information

Configuring Wireless LAN Settings Manually

Action
Enter the access point name/network name (SSID) and security setting (WEP, WPA,
etc.) directly.
Follow the procedure below.
1
Perform
to
in "Software Installation (1)" in the printed manual: Getting Started.
•
If the Detected Access Points List screen is displayed, go to .
2
When the Confirm Connection Access
Point screen appears, click No (A).
•
The Detected Access Points List screen is
displayed.
3
Click Manual Setup (B).
•
The Manual Setup screen is displayed.
4
Enter the access point name/network name
(SSID) in SSID (C).
5
Select the security protocol for the access
point in Encryption Method (D), then click
Configuration (E).
•
Go to either of the following steps according
to the selected Encryption Method (security
protocol).
Disable
Go to
WEP
Go to
WPA/WPA2
Go to
A
B
C
D
on page 9.
on page 9.
on page 9.
E