Canon PIXMA MP500 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Canon PIXMA MP500에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MP500 39 페이지. Continuous ink supply system
Canon PIXMA MP500에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 여기에서 시작 (2 페이지), 보충 설명서 (6 페이지), 설치 지침 (9 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

CAUTION

You may cause injury or damage the machine if you ignore any of these safety

precautions.

Location

• Place the machine on a flat, stable, vibration-free surface that is strong enough to

support its weight.

• Do not install the machine in a location that is very humid or dusty, in direct sunlight,

outdoors, or close to a heating source. Installing in such a location may result in fire or

electrical shock. To avoid the risk of fire or electrical shocks, install the machine in a

location with an ambient temperature range of 41°F to 95°F (5°C to 35°C) and

humidity of 10% to 90% (condensation free).

• Do not place the machine on a thick rug or carpet. If fibers or dust come inside the

machine, it could cause a fire.

Power supply

• Never remove the plug by pulling on the cord.

Pulling on the power cord may damage the cord and cause a fire or electrical shock.

• Do not use an extension cord as this may result in fire or electrical shock.

• Ensure that the area around the power outlet is kept clear at all times so you can easily

unplug the power cord if necessary. Otherwise you will be unable to disconnect the

power plug in case of an emergency.

• Never use a power supply source other than the one rated for the machine in the country

where you purchased the machine as it may result in fire or electrical shock.

The operating requirement of this machine is as follows:

110-120V AC, 50/60 Hz or 200-240V AC, 50/60 Hz (depending on local electrical

requirements)

• The socket-outlet shall be installed near the equipment and shall be easily accessible.